Putting together the log book for my car, need to make sure where I am supposed to drill the inspection holes in the cage. As it says in the logbook, main hoop, fore/aft bracing and supplemental bracing. The holes should be drilled at 3/16ths?
Mike
Measuring Holes For Cage.
Moderators: Rich Rock, Mazdahead, Matt Rowe
-
- Novice
- Posts: 223
- Joined: Sun Mar 21, 2004 10:04 pm
- Current Racecar: I race other people's cars
- Location: Boyertown, PA
- Contact:
BEst thing to do, for Time Trials and especially Road Racing:
Bring a rechargable drill (preferably charged) and bits to your first inspection. This way, the inspector himself can tell you the best locations for the holes.
Bring a rechargable drill (preferably charged) and bits to your first inspection. This way, the inspector himself can tell you the best locations for the holes.
Matthew A. Green --- mattgreen(at)msquaredracing(dot)com
M"squared" Racing! --- http://www.msquaredracing.com/
Former Chair- TTAC and TTSC
Can I drive your car?
M"squared" Racing! --- http://www.msquaredracing.com/
Former Chair- TTAC and TTSC
Can I drive your car?