I only took a few so......
The NUT! http://www.youtube.com/watch?v=WySiYDZUH0k
Sick fast: http://www.youtube.com/watch?v=YHLNQ29Pz1k
Nice and smooth: http://www.youtube.com/watch?v=UNqWBsu8CAo
Irratic: http://www.youtube.com/watch?v=SH526c7NHtA
Turn 2 @ Duryea
Moderators: Rich Rock, Mazdahead
- mrevilracing
- Novice
- Posts: 1099
- Joined: Sat Jun 16, 2007 3:24 pm
- PHA Permanent Number: 341
- Current Racecar: 2019 Mustang GT
- Location: Fleetwood, PA
Turn 2 @ Duryea
RIP Joe, my friend.
Must go faster!!!!
Must go faster!!!!
-
- Novice
- Posts: 431
- Joined: Wed Feb 07, 2007 6:43 pm
- Location: Pittsburgh
Re: Turn 2 @ Duryea
Thanks for the clips Steve! Not sure what the bouncing is about but it might be the new rear diff. Any ideas from anyone?
#88 SM
Mitsubishi evo 8
Mitsubishi evo 8
- mrevilracing
- Novice
- Posts: 1099
- Joined: Sat Jun 16, 2007 3:24 pm
- PHA Permanent Number: 341
- Current Racecar: 2019 Mustang GT
- Location: Fleetwood, PA
Re: Turn 2 @ Duryea
I can surmise but it would take a long explaination. Maybe ask on the EVO forums and state tire and coil over type as well as car weight. Someone should be able to answer that. Or even corner carvers.
I wish I had gotten more. I really, really wanted to vid at the finish line. But I wasn't about to give up a run for that, sorry. We'll see what happens next year. Maybe I skip a run or change run groups.
I wish I had gotten more. I really, really wanted to vid at the finish line. But I wasn't about to give up a run for that, sorry. We'll see what happens next year. Maybe I skip a run or change run groups.
RIP Joe, my friend.
Must go faster!!!!
Must go faster!!!!
-
- Novice
- Posts: 9
- Joined: Thu Nov 20, 2008 11:15 am
- PHA Permanent Number: 555
- Current Racecar: 96 Impreza 2dr turbo
- Location: Lancaster, PA
Re: Turn 2 @ Duryea
Jeremy,
Did you feel the rear of the car jerking around as it bounced?
Did you feel the rear of the car jerking around as it bounced?
PHA car #555
Re: Turn 2 @ Duryea
No experience with EVO's or WRX's, but it looks like diff lock up (center and the rear dif). This has been what happens to 4wd trucks when you lock the center diff and run a locker in the rear and try to turn with power. It binds up then lets loose causing the truck to bounce around.
-
- Novice
- Posts: 431
- Joined: Wed Feb 07, 2007 6:43 pm
- Location: Pittsburgh
Re: Turn 2 @ Duryea
Matt, the car is definatly rotating when it happens
RX- midget, you I think hit the nail on the head! I am running a 1.5 way locking rear diff this year to get the car to rotate under power. It has really changed the feel of the car to be able to induce oversteer with throttle. It has been learning curve that's for sure. I've spun more this year auto- x and hillclimbing then I have in the past few years all together. It's faster for sure but it's much tougher to ride the bull without being bucked off. Lol
now I'm sure you RWD folks will just laugh and say, see what we have to deal with. But in all honesty, I probably only driving a RWD car a few times in my life. I've only had trucks, fwd and awd cars. I bet I would suck at driving a RWD car!
RX- midget, you I think hit the nail on the head! I am running a 1.5 way locking rear diff this year to get the car to rotate under power. It has really changed the feel of the car to be able to induce oversteer with throttle. It has been learning curve that's for sure. I've spun more this year auto- x and hillclimbing then I have in the past few years all together. It's faster for sure but it's much tougher to ride the bull without being bucked off. Lol
now I'm sure you RWD folks will just laugh and say, see what we have to deal with. But in all honesty, I probably only driving a RWD car a few times in my life. I've only had trucks, fwd and awd cars. I bet I would suck at driving a RWD car!
#88 SM
Mitsubishi evo 8
Mitsubishi evo 8
Re: Turn 2 @ Duryea
Just for the record I have welded center and rear diffs in my car and it is fairly smooth. Any bouncing in my car comes from the to stiff suspension. Maybe that limits the bounce, produced by the welded diff to an extext. I'm not offering a solution just adding some input.
By the way my motor should be running next week if all goes well !
By the way my motor should be running next week if all goes well !