My names Ryan i'm new to this site. I plan to run my RX7 at most the PHA events this summer. I hope to have the car ready for pagoda end of june.
The motor is a GM 3800 with 67mm turbo.
All the fab work on the car was done by me Cage, motor swap, rear install, turbo manifolds, ect... The car it has a ford 8.8 solid rear axle with a 3 link setup. A G-Force t5 dogbax gearset. Custom stand alone hydro ebrake with willwood calipers.
The start of last season had a bit of problem with the hydro ebrake... I finally have that all sorted no more shearing off the mounting bolts.
The car was pretty loose due to panhard bar placement and overall suspension setup.
I’ve messed with the suspension a bit this winter so hopefully this season the car will drive proper…….
Over last winter I added a straight cut Dogbox transmission from G-Force. The trans is amazing but stupid loud.
Right now I'm in the middle of some fab work going back to a v-mount rad/intercooler setup and also reworking the turbo manifold and adding some more bars to the cage.
You see me at an event come up say hi!
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs038.snc1/3318_83362109082_527964082_2438788_4110896_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs038.snc1/3318_83362499082_527964082_2438790_6142685_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs038.snc1/3318_83362494082_527964082_2438789_5458728_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7125_143177249082_527964082_3413964_2873997_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7125_143177244082_527964082_3413963_1332493_n.jpg)
reworking the cooling setup and turbo manifolds
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs511.snc3/26848_399531939082_527964082_4929556_6662169_n.jpg)
Some added bracing and new paint
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs537.ash1/31438_412246294082_527964082_5247969_6475293_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs537.ash1/31438_412358679082_527964082_5250663_5943848_n.jpg)
Painted the engine bay Candy metalic red
![Image](http://hphotos-snc3.fbcdn.net/hs317.snc3/28523_412683124082_527964082_5259834_2521105_n.jpg)
![Image](http://hphotos-sjc1.fbcdn.net/hs297.snc3/28523_412683129082_527964082_5259835_7616807_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs327.ash1/28523_412683144082_527964082_5259837_7598466_n.jpg)
I got the engine back in the car.
![Image](http://hphotos-sjc1.fbcdn.net/hs592.snc3/31219_415469604082_527964082_5320098_7113987_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs592.snc3/31219_415469029082_527964082_5320040_3286341_n.jpg)
![Image](http://hphotos-sjc1.fbcdn.net/hs572.snc3/31219_415468474082_527964082_5319971_3027288_n.jpg)
Did some work on the car this past weekend. I finished up the intercooler/oilcooler mount and the cover plates for the cowl. I also finished the down pipe and cleaned up the passs side floor.
![Image](http://hphotos-sjc1.fbcdn.net/hs619.snc3/32569_418070309082_527964082_5372961_3127347_n.jpg)
![Image](http://hphotos-sjc1.fbcdn.net/hs619.snc3/32569_418068414082_527964082_5372776_113482_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs659.snc3/32569_418068789082_527964082_5372797_1618695_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs559.ash1/32569_418069724082_527964082_5372904_1419417_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs559.ash1/32569_418167199082_527964082_5376755_2758164_n.jpg)
![Image](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs559.ash1/32569_418167604082_527964082_5376768_2839602_n.jpg)