hkk, I think you may have mised my point.
I do have a 6-point roll bar, but my understanding is that I would need a full roll cage to run in any of your events.
I am questioning the comparison of a roll bar to a roll cage.
My apologies is my last post was not clear.
"Longest paved Hill Climb in North America"
Moderators: Rich Rock, Mazdahead, Matt Rowe
- JekylandHyde
- Novice
- Posts: 680
- Joined: Tue Jun 29, 2004 4:26 pm
- Location: Reading, PA
- Contact:
_____________Sponsorship: Amateur Motorsports_____________
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
-
- Novice
- Posts: 5
- Joined: Fri Apr 08, 2005 7:21 am
- Location: claremont, nh
ahah, bar instead if cage, more like a nhra type cage (main hoop, 2 aft supports, and 2 forward bars from the main hoop to the front of the car, like door bars)JekylandHyde wrote:hkk, I think you may have mised my point.
I do have a 6-point roll bar, but my understanding is that I would need a full roll cage to run in any of your events.
I am questioning the comparison of a roll bar to a roll cage.
My apologies is my last post was not clear.
i believe this would be acceptable, if you run the car in scca events and it is apporved im sure it will fly w/ our rules, but to take it one step forward if you would like you can email me a couple of pics and i will run them by our chief of tech to be 100% sure ( he lives right in my town and im there all the time) turbovdub@earthlink.net
- JekylandHyde
- Novice
- Posts: 680
- Joined: Tue Jun 29, 2004 4:26 pm
- Location: Reading, PA
- Contact:
Thank you
Pics are here:
http://www.jekylhyderacing.com/rollbar.htm
(the bars have since been painted and padded).
My friend also races a turbo MR2, but he has the 4-point Autopower Bar which is good for SCCA Solo1.
I do appriecate your efforts.
Pics are here:
http://www.jekylhyderacing.com/rollbar.htm
(the bars have since been painted and padded).
My friend also races a turbo MR2, but he has the 4-point Autopower Bar which is good for SCCA Solo1.
I do appriecate your efforts.
_____________Sponsorship: Amateur Motorsports_____________
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
-
- Novice
- Posts: 5
- Joined: Fri Apr 08, 2005 7:21 am
- Location: claremont, nh
- JekylandHyde
- Novice
- Posts: 680
- Joined: Tue Jun 29, 2004 4:26 pm
- Location: Reading, PA
- Contact:
Excellent! ... thanks for the leg work.
_____________Sponsorship: Amateur Motorsports_____________
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
"Your most unhappy customers are your greatest source of learning" ~ Bill Gates
-
- Novice
- Posts: 5
- Joined: Fri Apr 08, 2005 7:21 am
- Location: claremont, nh